Aaron from Stage and Audio based in Rockhampton recently performed a lighting upgrade at Winton Shire Hall.
The lighting rig was supplied as a front, middle and rear bar and the following Eventec products were used in the upgrade.
Front Bar:
4 x Event Lighting ENFORCER7X60BE 7 x 60W RGBW LED zoom wash moving head with pixel control
3 x Event Lighting PS300LEWW 300W warm white profile spotlight engine with PSLII19 profile spot 19 degrees lens
4 x Event Lighting F300WWMZ 300W warm white fresnels
Middle Bar:
4 x Event Lighting ENFORCER7X60BE 7 x 60W RGBW LED zoom wash moving heads with pixel control
2 x Event Lighting M1H300W 300W LED hybrid moving head
Rear Bar:
4 x Event Lighting ENFORCER7X60BE 7 x 60W RGBW LED zoom wash moving head with pixel control
2 x Event Lighting M1H300W 300W LED hybrid moving head
2 x Event Lighting F300WWMZ 300W warm white fresnels
For control, the main console was a Chamsys QuickQ 30. Aaron then utilised the following items.
1 x Event Lighting SPLIT228RDM 2 inputs 8 outputs DMX / RDM Splitter
1 x Event Lighting DMXRT recorder/trigger
1 x Event Lighting DMXRTWALL 6 button wall panel for DMXRT
1 x Event Lighting WDMX5XLRTX 5-pin WDMX transmitter
1 x Event Lighting WDMX5XLRRXA 5-pin WDMX receiver
After the job was complete, Aaron went on to say that “The WDMX system is so versatile and cost-effective! The DMX recorder and wall plate trigger panel are incredible, every system should have one of these. It gives the user a simple way to use the system without having to pull the console out. We configured it to also turn the power distros/dimmers on and off. Be sure to contact the Stage and Audio team, for installation and hire work, in the Central Queensland region.”
