The all new Monobloq by Overbloc – the Quickest, Safest and Easiest way to build rigging bridles and adjustable rigging points in venues and beyond.
What is the MONOBLOQ?
The Monobloq steel cable terminal allows the user to regulate the length of the cable in the pre-loading state and avoids irreversible damage to the cable once the loading operation is complete, preserving its mechanical properties and allowing it to be reused…
How does MONOBLOQ work?
Insert the 8mm steel rope into the open Monobloq device for 8mm steel ropes (or the 10mm steel rope into the open Monobloq device for 10mm steel ropes).
Once the steel rope is in the device, the pressure wedge is placed in the Monobloq body recess and the cover is fixed by 3 fixing screws.
Then the shackle is mounted and gets attached to the structural element.
Once Monobloq is suspended from the shackle, the length of the cable can be adjusted by exerting two-handed effort in the desired direction of travel. To fix the cable at a given point, a manual load must be exerted.
Finally, insert the set screw on the side opposite the load and screw until it is tightened.
Ready for use!
www.overbloc.net
Australian Distributor: Showtools www.showtools.com.au
