ChainMaster C1 Ultra 750 kg marks the latest chain hoist model in ChainMaster’s Ultra series. Complying with the SQ P2 standards as of 2018, C1 Ultra 750 kg features a dynamic safety factor and is based on the housing of the D8plus Ultra 1000 kg and, with a tare weight of only 40 kg and housing dimensions of 600mm by 270mm by 340mm, offering a balance between tare weight and load capacity.
Designed specifically for everyday setup in fixed installations, it lifts loads at 4m/min with a duty cycle of 40%. The standard equipment for the ChainMaster ProTouch Control System CM-880 includes an incremental encoder for positioning, a four-track geared limit switch for operating and emergency end position, as well as a load measuring shackle that reduces installation height compared to conventional load-measuring cells.
Depending on the project specification, two redundant absolute encoders can also be installed to achieve a SIL3 safety level corresponding to EN 61508. The high-end equipment would then also include two maintenance-free, independent low-noise brakes with brake gap monitoring and a digital temperature sensor. The standard protection level of the housing is IP55 and can be optionally upgraded to IP66.
www.chainmaster.de
Australian Distributor: ULA Group www.ulagroup.com
